ekorCCP

Programmable cubicle controller, based on a microproccesor with a PC structure and Linux operating system, flexible and programmable, used for remote control and automation of power substations as well as for solutions such as:

• Automatic line transfers
• Load shedding
• Distributed automation between Transformer Substations.
• Automatic transfers between the network and the engine/generator set
• Web server

The ekorCCP can incorporate up to 4 communication modules for digital inputs/outputs, each of these have 12 inputs and 6 outputs making it possible to program up to 48 inputs and 24 outputs for each controller.

For applications with a bigger number of digital signals we can use up to 32 ekorCCP in local networks.

The ekorCCP is used for the most common remote control and automation applications used by electrical utilities as well as typical industrial applications. With its graphic display we can visualize the electric scheme, history logs, measurements and alarms of the Medium Voltage network. The access and visualization of these parameters is very intuitive.

Its PLC structure makes it possible to program specific automation functions as well as the remote terminal unit function (RTU). It is possible to configure it as a web server for obtaining the most relevant data of the installation.

Technical Features:

• Graphic display
• Operating push-buttons
• 4 communication ports: one RS-232 configuration frontal port, two RS-232 ports for communicating with external devices and one RS-485/422 port for its use with other devices in local networks.
• Up to 32 switchgears
• Communication protocols
• IEC-870-5-101
• Procome
• ModBus
• Pid1, Gestel, Sab20
• CcpCom
• Possibility of automation (transfer, interlocks, etc.)
• Historic log of more than 1000 events